Garage floor concrete in Agoura Hills, CA - a slab built for the finish you want
Garage floor cracked, sinking or holding water at the door? We pour a slab with a packed base, planned joints and a proper cure.
- Licensed and fully insured.
- Free estimates at your property.
- We reply within 1 business day.
What goes into a new garage floor in Agoura Hills?
Garage floor concrete in Agoura Hills means a new slab that's poured, finished flat and then cured. Curing is the few days of keeping it moist that make concrete hard-wearing and less likely to crack, and done right it gives you a floor that stays flat under your cars and takes whatever finish you choose.
Most calls start with an old floor that's cracked through, sunk near the door or holding water after a rain, and the fix is usually tearing it out and starting over from the dirt. The price moves with the garage's size, how much base work the ground needs once the old slab is out, the steel, and whether you want a bare floor, a coating or room for a car lift later. The schedule turns on the weather for the pour and the cure that follows, and the written estimate spells out the prep, steel, joints and curing your garage needs.
How we build a garage floor concrete slab
If there's an old floor, we break it out and haul it away, then dig past the soft dirt to firm subgrade, the ground the slab rests on, and pack the base so it doesn't settle later. We check where water will run before the forms go up, set the steel, the rebar or wire mesh that holds the concrete together, and pour early in the day because a top finished in midday heat can turn weak and dusty. After finishing, we cut control joints, shallow grooves that give the slab planned places to crack instead of random ones. Curing should start as soon as possible, with a sprayed curing compound or with damp burlap kept wet for at least 3 days, and I'll tell you which one we're using. If the budget gets tight, the base is the last thing I'd cut, because nobody sees it once it's poured and it decides whether your floor stays flat.
Garage jobs often run into the work around them. If you'd like the concrete people see from the street to have color or pattern, that's our decorative concrete work, and if your garage is dug into a hillside with dirt pressing on the back or the driveway edge, we can plan concrete retaining walls together with the floor.
Bare broom-finished floor
A broom dragged across the wet surface leaves a light texture that gives tires and shoes some grip. It suits a working garage you'll sweep out and hose down.
Floor planned for a coating
If you want epoxy or polyaspartic, the hard, glossy coatings people put on garage floors, tell us before we pour. It changes what goes under the slab and how we finish and cure the top.
Floor ready for a car lift
If a two-post lift might go in someday, get the lift maker's concrete requirements before we build, because lift loads and anchors can call for a specific strength and reinforcement. It's far easier to build for that now than to cut out a section later.
If the old floor is sinking, cracked through or letting water run toward the house, call (747) 219-1796 now rather than waiting for it to get worse.
What happens after you call about a garage floor?
From the first call to the final walk-through, I'm the one you deal with. Here's how a garage floor job runs with us, and what you'll have in hand before any concrete shows up.
Call or send a message
Call (747) 219-1796 or use the form, and tell us roughly how big the garage is and what you want for it. We get back to you and set a time for me to come out.
I walk the garage with you
I look at the old floor, where the water goes and what you have in mind, including any coating or lift plans. We check with the building office for your address, and if the job needs a permit, an engineer or a scan first, I tell you then.
You get a written estimate
It spells out the prep, drainage, steel, joints and curing line by line, so you can see where the money goes before you decide anything. If a permit is needed, we apply for it before any work begins.
We build it and walk it
I'm on site with our crew from setting the forms to the last pass of the finish. Before we pack up, we walk the new floor with you.
Get a written estimate for your garage floor
Send the form and we reply within 1 business day to set a time. I come out, look at your garage and write you a free estimate at your property, with no pressure to book.
(747) 219-1796Pouring garage floor concrete in Agoura Hills heat and ground
Summer days here run hot, and Los Angeles County's general plan expects extreme heat to come more often, hit harder and last longer. Concrete guidance says a windy, sunny day calls for stricter care of fresh concrete than a calm, humid day at the same temperature, and that drying problems come mostly in summer but can show up any time of year. So we watch the wind as well as the thermometer when we pick a pour date, and I'd rather move the pour a day than finish a slab into a hot wind, the same call we make on jobs in Calabasas.
The city's draft safety plan says ungraded native soil in the lowland parts of Agoura Hills has the highest potential to shrink and swell, and would have to be removed or heavily reworked before building on it. We won't know what's under your old floor until it's out, which is why we dig to firm ground and pack the base. We're based in Agoura Hills and work on both sides of the county line, from here to Thousand Oaks.
Garage floor questions we hear in Agoura Hills
Do I need a vapor retarder under my garage floor?
Usually only if you plan to coat it. One garage-slab guide calls a vapor retarder, a sheet that slows ground moisture rising into the slab, worth having under an epoxy or polyaspartic coating, and says a bare broom-finished floor in an unheated garage needs none. That's why I ask about the finish before anything else.
Will my new garage floor crack like the old one?
It may get a few cracks, but most random cracks in a young slab look bad and rarely affect its strength or how long it lasts. Steel can't stop cracking, though in the right spot inside the slab it keeps cracks narrower, so ask any contractor where theirs will sit. Our work is backed by our satisfaction guarantee.
How do I know when a new garage floor is ready for epoxy?
You know when the slab's moisture and surface texture have been checked, not when it looks dry. On a young floor, moisture, oil, chemicals from tires and leftover curing compound can all weaken the coating's bond, so the test comes first.
How much does a new garage floor cost in Agoura Hills?
A garage floor slab in the Los Angeles area usually costs about $8 to $15 per square foot. Where yours lands depends on tearing out the old floor, how much base work the ground needs, the steel and whether you're planning a coating or a lift. The written estimate I give you after seeing the garage breaks those out.
Does a garage floor contractor need a license in California?
Yes, for anything beyond a small job. The state license board classifies a concrete contractor as one who forms, pours, places, finishes and installs concrete, and only minor work under $500 in total, labor and materials included, is exempt, unless it's part of a larger project. We're licensed and fully insured.
What is the best way to protect fresh concrete on a hot, windy day?
Slow the drying between finishing steps with wind breaks, fog sprays, or wet burlap or plastic sheets. Fast drying causes early shrinkage cracks, so on days like that, ask the crew which of these they'll use.
Other concrete work around your garage
If you want the concrete outside the garage door to look like more than plain gray, decorative concrete adds color and texture to the approach and walkways.
Hillside lots often put the garage against a cut slope, and a concrete retaining wall holds that dirt back so it doesn't push or wash toward the slab.
Call us about your new garage floor
Have the garage's size, the finish you want and any lift plans ready when you call (747) 219-1796 or send the form, so the first visit covers everything.